Status Screen - TRENDnet TEW-435BRM User Manual

Wireless ADSL Router User Guide

Status Screen

In Modem mode, the Status screen looks like the example below.
Data - Status Screen (Bridge Mode)
ADSL
Modem Status
DownStream
Connection Speed
UpStream Connection
Speed
VC 1 Status
VC 2 Status
VC 3 Status
VC 4 Status
ADSL Details
LAN
IP Address
Network Mask
MAC Address
Wireless
Name (SSID)
Region
Figure 72: Status Screen - Bridge Mode
This indicates the status of the ADSL modem component.
Displays the speed for the DownStream Connection.
If connected, displays the speed for the Up Stream (upload)
ADSL Connection.
For each VC (Virtual Circuit), the current status is displayed. This
will be either "Enabled" or "Disabled".
Click this button to open a sub-window and view the details of
each VC (Virtual Circuit).
The IP Address of the Wireless ADSL Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the MAC Address for the Wireless ADSL Router, as
seen on the LAN interface.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identifi-
er).
The current region, as set on the Wireless screen.
92