TRENDnet TEW-435BRM User Manual page 18

Wireless adsl router

Hide thumbs Also See for TEW-435BRM:

Table of Contents

Setup

Setup Wizard VC Screen

Enable

VPI

VCI

Multiplexing

ATM Service

LAN IP Address

When finished, click "Next" and complete the Wizard.

After completing the Wizard, you can check the Status screen to see the VC has been

corrected established.

Figure 8: Setup Wizard - VC2

The VC number is displayed

To use this VC, you must enable it by checking this checkbox.

Enter the VPI value provided by your ISP.

Select the multiplexing value provided by your ISP.

Enter the IP address of the device on your LAN which will receive the

data on this VC.

•

For Video-on-Demand, this would be the IP address of your

SetTop Box.

•

For VoIP, this would be the IP address of your VoIP TA.

•

Note that this IP address does not have to be in the same IP address

range as other devices on your local LAN.

Table of Contents