•
Configuration File Upload/Download.
the TEW-431BRP to your PC, and restore (upload) a previously-saved configuration file
to the TEW-431BRP.
•
Remote Management.
The TEW-431BRP can be managed from any PC on your LAN.
And, if the Internet connection exists, it can also (optionally) be configured via the Inter-
net.
•
Network Diagnostics.
You can use the TEW-431BRP to perform a Ping or DNS lookup.
•
UPnP Support.
UPnP (Universal Plug and Play) allows automatic discovery and con-
figuration of the TEW-431BRP. UPnP is by supported by Windows ME, XP, or later.
Security Features
•
Password - protected Configuration
. Optional password protection is provided to
prevent unauthorized users from modifying the configuration data and settings.
•
Wireless LAN Security
. WEP (Wired Equivalent Privacy) is supported, as well as
Wireless access control to prevent unknown wireless stations from accessing your LAN.
•
NAT Protection.
An intrinsic side effect of NAT (Network Address Translation) tech-
nology is that by allowing all LAN users to share a single IP address, the location and
even the existence of each PC is hidden. From the external viewpoint, there is no network,
only a single device - the TEW-431BRP.
•
Stateful Inspection Firewall.
All incoming data packets are monitored and all incom-
ing server requests are filtered, thus protecting your network from malicious attacks from
external sources.
•
Protection against DoS attacks.
DoS (Denial of Service) attacks can flood your
Internet connection with invalid packets and connection requests, using so much band-
width and so many resources that Internet access becomes unavailable. The TEW-431BRP
incorporates protection against DoS attacks.
Package Contents
The following items should be included:
•
The TEW-431BRP Unit
•
Power Adapter
•
Quick Installation Guide
•
CD-ROM containing the on-line manual.
If any of the above items are damaged or missing, please contact your dealer immediately.
Introduction
Save (download) the configuration data from
3
TEW-431BRP User Guide
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
Power LED
On - Power on.
Off - No power.
Status (Red)
On - Error condition.
LED
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware Up-
grade.
LAN LEDs
For each port, there are 2 LEDs
•
Link/Act
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub) port.
•
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
•
100
•
On - Corresponding LAN (hub) port is using 100BaseT.
•
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN LED
On - Connection to the Broadband Modem attached to the WAN (Inter-
net) port is established.
Off - No connection to the Broadband Modem.
Flashing - Data is being transmitted or received via the WAN port.
Wireless LED
On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
4