Connection Details - Singtel Ras; Connection Details - Fixed/Dynamic Ip Address - TRENDnet TEW-431BRP User Manual

Connection Log
•
The Connection Log shows status messages relating to the
Connection Log
existing connection.
•
The Clear Log button will restart the Log, while the Refresh
button will update the messages shown on screen.
Buttons
Connect If not connected, establish a connection to Telstra Big Pond.
Disconnect If connected to Telstra Big Pond, terminate the connection.
Clear Log Delete all data currently in the Log. This will make it easier to read
new messages.
Refresh Update the data on screen.

Connection Details - SingTel RAS

If using the SingTel RAS access method, a screen like the following example will be displayed
when the "Connection Details" button is clicked.
Figure 27: Connection Details - SingTel RAS
Data - SingTel RAS Screen
Internet
RAS Plan The RAS Plan which is currently used.
Physical Address The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
IP Address The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).
Operation and Status
41
TEW-431BRP User Guide
Network Mask The Network Mask associated with the IP Address above.
The IP Address of the remote Gateway or Router associated with the
Default Gateway
IP Address above.
DNS IP Address The IP Address of the Domain Name Server which is currently used.
This will show "Enabled" or "Disabled", depending on whether or
DHCP Client
not this device is functioning as a DHCP client.
If "Enabled" the "Remaining lease time" field indicates when the IP
Address allocated by the DHCP Server will expire. The lease is
automatically renewed on expiry; use the "Renew" button if you wish
to manually renew the lease immediately.
Buttons
Release/Renew This button is only useful if the IP address shown above is allocated
automatically on connection. (Dynamic IP address). If you have a
Button will display
Fixed (Static) IP address, this button has no effect.
EITHER
•
If the ISP's DHCP Server has NOT allocated an IP Address for
"Release"
the TEW-431BRP, this button will say "Renew". Clicking the
OR
"Renew" button will attempt to re-establish the connection and
"Renew"
obtain an IP Address from the ISP's DHCP Server.
•
If an IP Address has been allocated to the TEW-431BRP (by the
ISP's DHCP Server), this button will say "Release". Clicking the
"Release" button will break the connection and release the IP
Address.
Update the data shown on screen.
Refresh

Connection Details - Fixed/Dynamic IP Address

If your access method is "Direct" (no login), a screen like the following example will be
displayed when the "Connection Details" button is clicked.
Figure 28: Connection Details - Fixed/Dynamic IP Address
42