TRENDnet TEW-431BRP User Manual page 15

Figure 16: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the TEW-
431BRP will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TEW-431BRP.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the TEW-431BRP. To set this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the
TEW-431BRP 's IP address, as shown in Figure 17 below.
•
If necessary, use the Up button to make the TEW-431BRP the first entry in the Gate-
ways list.
PC Configuration
25
TEW-431BRP4 User Guide
Figure 17 - Windows NT4.0 - Add Gateway
2. The DNS should be set to the address provided by your ISP, as follows:
•
Click the DNS tab.
•
On the DNS screen, shown below, click the Add button (under DNS Service Search
Order), and enter the DNS provided by your ISP.
26