Related Manuals for VES-Artex 101243
Summary of Contents for VES-Artex 101243
- Page 1 HIGH-VELOCITY BASKET FAN Product Manual www.ves-artex.com 1.888.622.2999 SAVE THIS MANUAL FOR FUTURE REFERENCE...
-
Page 2: Table Of Contents
1/3 HP 1700 RPM Single Phase ......................... 12 1/10 HP 1725 RPM Single Phase ....................... 12 OPERATION ............................... 12 FOR SAFE OPERATION ........................12 MAINTENANCE SCHEDULE ........................13 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com... - Page 3 MAINTENANCE GUIDELINES........................13 ..........................14 OUTINE AINTENANCE REPAIR GUIDELINES ..........................14 DISPOSAL ..............................14 REPLACEMENT PARTS ..........................15 ..............................15 TROUBLESHOOTING ..........................16 GLOSSARY ..............................17 WARRANTY ............................... 17 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com...
-
Page 4: Product Numbers
36” High-Velocity Basket Fan FAN HIGHLIGHTS VES-Artex high-velocity basket fans are powerful and efficient circulation fans. They are constructed with high-grade steel, zinc plated, and powder-coated making them corrosion- resistant and durable for harsh agricultural environments. Equipped with sealed motors with either 1/10, 1/3, or 1/2 horsepower, these basket fans have the power to push the maximum air velocity to the coverage area. -
Page 5: Target Audience
Read and understand this manual before installing or servicing your VES-Artex product. For the safe handling of VES-Artex products, you will find the following safety words: DANGER, WARNING, CAUTION, and NOTICE throughout this manual. These will identify safety levels as described below. -
Page 6: General Safety
5. Falling damage. Mount fans with 5. Ensure all fan parts are VES-Artex-approved hardware. accounted for before 6. Always wear personal protective installation. equipment when installing and servicing VES-Artex products. 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com... -
Page 7: Unpacking
High-Velocity Basket Fan UNPACKING GENERAL AUTION OTICE 1. Use extreme care when 1. Once a VES-Artex product is unpacking the fan. received, inspect the product 2. Do not remove zip ties (if for any damage. It is present) during transportation... -
Page 8: Mechanical Installation
To reduce the risk of fire or electrical in the manual or the warranty will be shock, do not expose to water or rain. void. Contact VES-Artex if you are unsure of the dimensions listed. FAN ASSEMBLY Step 1: Install the Rear Guard 1. -
Page 9: Step 4: Secure With Zip Ties (Optional)
2. Mount the assembled bracket (#7A-B for 20", 24", & 30" fans, or #18 for 12" fans) in one of the recommended positions shown in the diagrams. 3. Ensure the bracket is oriented correctly for optimal adjustability. 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com... -
Page 10: Step 3: Secure The Fan Head
MOTOR WIRING VES-Artex does not supply the motor-to-control interconnecting wires. These must be supplied by the installer. All Electrical work must be completed by a licensed electrician in accordance with all Local and National electrical and safety codes, as well as the National Fire Protection Agency (NFPA) where applicable. -
Page 11: 1/2 Hp 1725 Rpm Single Phase
1/2 HP 1725 RPM Single Phase 1/2 HP 825 RPM Single Phase 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com... -
Page 12: 1/3 Hp 1700 Rpm Single Phase
DO NOT use the fan in windows. Rain and moisture may create electrical hazards. • Close supervision is necessary when this unit is used by or near children. 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com... -
Page 13: Maintenance Schedule
6 Months General cleaning: Wipe blade surfaces. ARNING To avoid shock injury or catastrophic electrical damage to VES-Artex products, do not use pressurized water on the motor or control. Introducing pressurized water will void the warranty. Inspect blades for any irregularities. -
Page 14: Routine Maintenance
For this reason, avoid tight-fitting mounting and safety guards that may obstruct the ventilation openings. • Prevent obstructions from fan inlets and outlets that haven’t been designed by VES-Artex. REPAIR GUIDELINES Replace necessary parts if a part defaults or breaks. Be sure to review the warranty information to determine warranty qualifications. -
Page 15: Replacement Parts
Motor Rear Guard Blade Front Guard Washer, Fender 3/16” Nut Nylock, #10-24 Bolt, Hex, 3/8-16 X 1.25” Washer, Fender, 3/8” Nut, Nylock, 3/8-16 Bolt, Hex, 1/4-20 X 1.00” 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com... -
Page 16: Troubleshooting
Spyder. Damaged blades Run the fan without the blade, Debris if the motor does not wobble, then the motor is not defective, but the blades may be damaged. 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com... -
Page 17: Glossary
LIMITED WARRANTY & RETURN POLICY THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. See any updated warranty and policy information on the VES-Artex website: www.ves- artex.com/ves-artex-warranty/. 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800...
Need help?
Do you have a question about the 101243 and is the answer not in the manual?
Questions and answers