Related Manuals for VES-Artex PLUG & PLAY
Summary of Contents for VES-Artex PLUG & PLAY
- Page 1 PLUG & PLAY CEILING FAN (INDC) Quick Start Guide www.ves-artex.com 1.888.622.2999 SAVE THIS MANUAL FOR FUTURE REFERENCE CONFIDENTIAL...
-
Page 2: Mechanical Installation
Be sure to follow all directions listed in injury, do not bend the blade the manual or the warranty will be void. brackets when installing the Contact VES-Artex if you are unsure of brackets, balancing the blades, the directions listed. or cleaning the fan. - Page 3 10’ above the floor level to meet OSHA standards. These fans are designed to have the blades at a height greater than 10’ from the floor and should never be mounted with the blades lower than the 7’ OSHA standard for unguarded fans. 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com...
-
Page 4: Control Installation
MOTOR LABEL MOTOR WIRING VES-Artex does not supply the motor-to-control interconnecting wires. These must be supplied by the installer. All Electrical work must be completed by a licensed electrician in accordance with all Local and National electrical and safety codes, as well as the National Fire Protection Agency (NFPA) where 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800... - Page 5 Plug and cord + Socket personnel. VES-Artex recommends all wiring connections be housed by a NEMA4X wiring enclosure to protect against foreign material and splashing water. Please review local code as this may be a requirement in your area.
-
Page 6: Operation
2. Do not place fingers or objects in the ceiling fan while the motor is connected to the power source. 3. Do not attach foreign objects to the blades of the ceiling fan. 1313 Lakeland Drive, Chippewa Falls, WI 54729, United States | 715.720.0800 www.ves-artex.com...
Need help?
Do you have a question about the PLUG & PLAY and is the answer not in the manual?
Questions and answers