Changing The Display Behavior - Dell PowerEdge 1655MC System Configuration Manual

To assign names to servers:
In the Names dialog box, select the name or slot number you want to change and click
1
Modify.
The Name Modify dialog box appears.
Type a name in the New Name box.
2
Names of servers may be up to 15 characters long. Legal characters include: A–Z, a–z,
0–9, a space, and a hyphen.
Click OK to transfer the new name to the Names dialog box. Your selection is not
3
saved until you click OK in the Names dialog box.
Repeat step 1 through step 3 for each server module in the system.
4
Click OK in the Names dialog box to save your changes.
5
Click X or press <Esc> to exit the dialog box without saving changes.
6

Changing the Display Behavior

Use the Menu dialog box to change the display order of server modules and set a screen
delay time for OSCAR.
Press <Print Screen> to launch OSCAR.
1
The Main dialog box appears.
Click Setup-Menu.
2
The Menu dialog box appears.
Select Name to display servers alphabetically by name, select EID to display server
3
modules numerically by EID number, or select Slot to display servers numerically by
slot number.
Click OK.
4
To set a screen delay time for OSCAR:
Type the number of seconds (0–9) that you want to delay the display of OSCAR after
1
you press <Print Screen>.
Entering 0 instantly launches OSCAR without delay.
1-20
System Configuration Guide
NOTE: The server module names are not saved unless you click OK.