Error When Installing Software; Changing The Display Mode On Your Device - Dell Axim X30 Owner's Manual

Error when Installing Software

When installing software on your Dell Axim™ X30, you may receive the
message: The program you have installed may not display
properly because it was designed for a previous
version of Microsoft
receive this message, perform the following steps:
Tap ok to continue installing the software.
1
Run the software in portrait mode. See "Changing the Display Mode."
2
NOTE:
Most device programs function with the Windows Mobile 2003 Second
Edition operating system when using portrait mode. Dell cannot guarantee
proper functioning of a program that was not written for Windows Mobile 2003
Second Edition.
NOTE:
The Dell Axim X30 has the Windows Mobile 2003 Second Edition
operating system installed. Most device software packages currently available
were designed for previous versions of the Windows Mobile operating system.
If you need technical assistance with the software you are trying to install,
contact the manufacturer of the software. Dell does not provide support for
third-party electronics and accessories.
For more information on the Dell™ Electronics and Accessories Technical
Support Policy, search the Dell Knowledge Base at support.dell.com for
document number RA1062902.

Changing the Display Mode on Your Device

To change the display mode from landscape to portrait:
Tap Start.
1
Tap Settings. The Settings window appears.
2
Tap the System tab.
3
Tap Screen. The Screen window appears.
4
Tap Portrait to select portrait mode.
5
Tap ok and close the window.
6
NOTE:
To change the display mode from portrait to landscape, follow the steps
in reverse order.
86
Adding and Removing Programs
®
Windows Mobile™ software. If you