Using Your Projector; Turning Your Projector On; Turning Your Projector Off - Dell M209X User Manual

Using Your Projector

Turning Your Projector On

NOTE:
Turn on the projector before you turn on the source. The Power button
light blinks blue until pressed.
Remove the lens cap.
1
Connect the power cord and appropriate signal cables. For information about
2
connecting the projector, see "Connecting Your Projector" on page 7.
Press the Power button
3
Power button
Turn on your source (computer, DVD player, etc.). The projector automatically
4
detects your source.
The Dell logo will be displayed if no signal detected.
5
If the "Searching for signal..." message appears on the screen, ensure that the
appropriate cables are securely connected.
If you have multiple sources connected to the projector, press the Source button
on the remote control or control panel to select the desired source.

Turning Your Projector Off

NOTICE:
Unplug the projector after properly shutting down as explained in the
following procedure.
To turn off the projector:
Press the Power button
1
Press the Power button
2
The projectors cooling fans are on for 90 seconds before the projector switches off
completely.
To power off the projector quickly, press the Power button
3
cooling fans are still running.
NOTE:
Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
(see "Using the Control Panel" on page 17 to locate the
).
.
again to turn off the projector.
while the projectors
Using Your Projector
3
13