Copying Cds - Dell Inspiron 2600 Owner's Manual

HINT: Ensure that you
follow all copyright laws
when you create CDs.
HINT: The information in
this section also applies to
using Easy CD Creator
Basic with a DVD+RW or
a DVD+R drive.
HINT: Some music and
game CDs are copy-
protected. If you have a
CD that cannot be copied,
you must use the original
CD for everyday use.
34
Setting Up and Using Yo ur Computer

Copying CDs

This section applies only to computers that have a CD- or DVD-recording
device.
The information in this section is based on the Roxio Easy CD Creator
Basic documentation that came with your computer. See the following
section, "Using Easy CD Creator Basic," for instructions on how to locate
that documentation.
To burn CDs, you need to use CD-burner software. Roxio Easy CD Creator
Basic is your computer's CD-burner software. The software includes the
following project programs that enable you to record specialty CDs for
different types of uses:
• DirectCD allows you to format a blank CD-R or CD-RW disc so that
you can use Microsoft
files to the CD-RW drive. You can use a DirectCD-formatted CD-RW
disc like another hard drive on your computer because CD-RW discs
are fully rewritable (CD-R discs can be used with DirectCD, but that
media type has overwriting limitations—see "Using Blank CD-R Discs
or Blank CD-RW Discs" for recording media differences).
• MusicCD allows you to burn custom music CDs.
• DataCD allows you to copy a variety of your documents, such as
spreadsheet or accounting files, to a CD for permanent storage.
• Disc Copier allows you to make a backup copy of almost any type of
CD. This program allows you to make a copy of a CD for everyday use
so that you can archive and save the original copy. (Disc Copier is
titled "CD Copier" in some versions of Roxio CD Creator Basic.)
All four project programs are available on the Easy CD Creator Basic Select
a Project menu screen. To view the Select a Project menu screen, click the
Start button, point to All Programs→ Roxio Easy CD Creator, and then
click Project Selector.
® ®
Windows Explorer to drag and drop data