Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 7.2 Watts (0.06 Amps). Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase
with purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections,
exposed copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543)
Assembly of this product may require more than one person.
PACKAGE CONTENTS
B
H
F
Assembly
1
Assembling the Legs to the Body
Insert the connecting rods on the Front and Hind Legs (F,G)
into the connecting holes on the underside of the Body (D) .
F
3
Assembling the Head / Neck to the Body
Insert the connecting rods at the bottom of the Head / Neck (C)
into the connecting holes on the top front of the Body (D) and
fasten together at the connecting loops with Plastic Ties (K).
C
Use and Care Guide
5 ft Icicle Shimmer TWINKLING
LED Deer
A
I
B
J
C
E
D
G
D
G
K
D
K
L
2
Securing the Legs to the Body
Fasten the Body (D) and Legs (F,G) together with the Plastic
Ties (K) over the metal wire where the parts meet. The Legs
come with metal bars attached to stabilize the Deer. Insert the
hooked end of the metal bars into the metal nut on the
opposite Leg.
4
Assembling the Antlers to Head / Neck
Insert the connecting rods on both Antlers (A) into the matching
connecting holes at the top of Head / Neck (C).
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1009537859
Model # 23RT04823112
TOOLS REQUIRED
Part
Description
A
Antler
B
Ear
C
Head / Neck
D
Body
E
Tail
F
Front Leg
G
Hind Leg
H
Bow Tie
I
Spare Fuse
J
Spare Bulb
K
Plastic Tie
L
Ground Stake
K
F
G
A
C
Plier
Quantity
2
2
1
1
1
2
2
1
2
2
15
4
D
HOMEDEPOT.COM
Need help?
Do you have a question about the 23RT04823112 and is the answer not in the manual?
Questions and answers