4.1.1
Entrance and Exit Prompts
With 'Ready' displayed on the LCD, press the
Mode.
Note: While in the Menu Mode, the printer will stop processing new DPL
(or bitmapped) data.
MENU MODE
ENTER PASSWORD
0 0 0 0
KEEP HOST CHANGES?
ENTER = YES
SAVE CHANGES?
ENTER = YES
W-Class
Depending upon the configuration of the
printer, the following Entrance and Exit
Prompts may be displayed when accessing
or leaving the Menu System.
You are attempting to enter the Menu Mode.
Security has been enabled and now the
correct user-definable password is required
for access the Menu Mode functions.
You are now entering the Menu Mode.
Existing Host commands have affected the
configuration
of
ENTER will save these changes; otherwise,
the printer will revert to previously saved
settings.
You are now exiting the Menu Mode, but
have made changes to the printer's settings.
Pressing ENTER will reconfigure your
printer
according
otherwise,
the
previously saved settings.
Note: If changes have been made that
require a reset, the printer will
automatically invoke that reset.
key to enter the Menu
the
printer.
to
these
printer
will
revert
Pressing
changes;
to
29