Serta PRO PLATFORM Quick Setup Manual

Parts
Legs (6)
STEP 1
Always use two people when setting up, moving or flipping base.
Place bed base box in a desired location with bottom of box facing up.
Remove binding straps and packing materials, making sure not to
puncture box with any sharp objects.
STEP 2
Remove the bed base from the box. Unfold the bed making sure to
keep the bottom of the bed facing upwards.
STEP 3
To install the legs, thread the washer over the screw on the leg. Next,
screw the leg into the nutsert on the frame. Do not over-tighten.
Quick Setup Guide
Always use two people when setting up the base
STEP 4
Carefully flip the base over onto its legs.
Important: Always use two people when setting up, moving or flipping
the base.Do not drag across the floor. Do not rest frame on its side,
excessive pressure may damage the legs.
Setup is now complete!
Customer service (1-888)-550-3746