Kair CRE100HTP+ Installation And Maintenance Manual

CRE100HTP+
Smart Fan
Installation and Maintenance
1.0 SAFETY INFORMATION
•
The installation must be completed by competent persons in accordance
with good industry practice and should conform to all governing and
statutory bodies i.e. IEE, CIBSE, HVCA, etc.
•
If the environment in which the product is installed also houses a fuel-
operating device (water heater, methane stove etc. that is not a "sealed
chamber" type), it is essential to ensure adequate air intake, to ensure good
combustion and proper equipment operation.
•
Ensure adequate air return into the room in compliance with existing
regulations in order to ensure proper device operation. Ensure the fans
capability by checking the performance fan curve. Flexible ducting is not
recommended.
•
Disconnection from the supply mains must be incorporated within the fixed
wiring in accordance with the wiring regulations and shall have a minimum
contact separation of 3mm in accordance with the latest edition of the IEE
Wiring Regulations.
•
In case of window installation it is necessary to use the appropriate window
kit, which is not included. Glass thickness from 11mm to 35mm.
•
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Cleaning and user maintenance should not be made by children
without supervision. The unit is not intended for use by persons (including
children) with reduced physical, sensory or mental capacities or those with a
lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the unit from a person responsible for their
safety. Children should be supervised to ensure that they do not play with the
unit.
*For wall/window mounted installations only
IPX4*
Version: CRE100HTP+/20231109
1