Using The Configuration Utility - D-Link DWL-G520m Manual

DWL-G520M User's Manual
Using the Configuration Utility
D-Link DWL-G520M 108G MIMO Wireless Desktop adapter uses the Configuration
Utility as the management software. The utility provides the user an easy interface
to change any settings related to the wireless adapter. After you have completed the
installation of the DWL-G520M (refer to the Quick Installation Guide that came with
your purchase) whenever you start the computer, the Configuration Utility starts
automatically and the system tray icon is loaded in the toolbar (see illustration below*).
Clicking on the utility icon will start the Configuration Utility. Another way to start the
Configuration Utility is to click on Start > Programs > D-Link Technology > D-Link
Wireless Utility.
If you are using Windows XP, you can use either the Zero Configuration Utility or the
D-Link Configuration Utility.
To use the D-Link Configuration Utility with XP,
right-click on the wireless network icon in the
taskbar in the lower right-hand corner of your
computer screen.
In the window that appears, select View
Available Wireless Networks and click the
Advanced button. The screen at right will
appear.
Select the Wireless Networks tab.
Uncheck the box in the properties window
that enables windows configuration.
After you have done this, you can then use the D-Link
Configuration Utility with XP by clicking on the D-Link
Configuration Utility icon.
If the icon does not display in the taskbar, then click on
this icon on your desktop to open.
D-Link Systems, Inc.
Using the Configuration Utility
*Configuration Utility
icon in the system tray
12