Using The Configuration Utility - D-Link DWL-AG660 Manual

Using the Configuration Utility
D-Link AirPremier
the management software. The utility provides the user an easy interface to
change any settings related to the wireless adapter. After you have completed
the installation of the DWL-AG660 (refer to the Quick Installation Guide that
came with your purchase) whenever you start the computer, the Configuration
Utility starts automatically and the system tray icon is loaded in the toolbar
(see illustration below*.) Clicking on the utility icon will start the Configuration
Utility. Another way to start the Configuration Utility is to click on Start >
Programs > D-Link AirPremier AG > D-Link AirPremier AG Utility.
If you are using Windows XP, you can use either the Zero Configuration Utility
or the D-Link Configuration Utility.
To use the D-Link Configuration Utility with XP, right-click
on the wireless network icon in the taskbar in the lower
right-hand corner of your computer screen.
In the window that appears, select
View Available Wireless Networks
and click the Advanced button. The
screen at right will appear.
Select the Wireless Networks tab.
Uncheck the box in the properties window
that enables windows configuration.
To access the WPA security features
of the DWL-AG660 you must install
the Aegis software (included on
the installation CD) before inserting the
Adapter into your laptop PC.
After you have done this, you can then use the D-Link
Configuration Utility with XP by clicking on the D-Link
Configuration Utility icon.
If the icon does not display in the taskbar, then click on
this icon on your desktop to open.
AG DWL-AG660 uses the Configuration Utility as
™
13
*Configuration Utility icon in
the system tray