D-Link DWL-G122 Quick Installation Manual
D-Link DWL-G122 Quick Installation Manual

D-Link DWL-G122 Quick Installation Manual

Airplus g 802.11g/2.4ghz
Hide thumbs Also See for DWL-G122:



Table of Contents

Summary of Contents for D-Link DWL-G122

  • Page 2: Installing The Drivers

    Installing the Drivers install Turn on the computer and insert the D- Link AirPlus ™ the DWL-G122 DWL-G122 Driver CD in the CD-ROM drive. Wireless USB Adapter into your computer The step-by-step instructions that follow are shown in before installing the Windows XP.
  • Page 3 Installing the Drivers (continued) Click Next Click Next Click Next Please shutdown your computer at this time!
  • Page 4 Connecting the DWL-G122 Adapter to Your Computer Connect the DWL-G122 Adapter before starting up your computer. Link/Power LED Link - Indicates that the DWL-G122 is properly installed. Activity - Blinks when data is being transmitted through the wireless connection. USB Port Used to connect the DWL-G122 to your computer.
  • Page 5 The Found New Hardware Wizard After connecting the DWL-G122, t h e F o u n d N e w H a rd w a r e Wizard (Windows XP) screen will appear: Select Install the software automatically (Recommended) Click...
  • Page 6 Your Installation is Complete! G Configuration After completing the Found New Hardware Wizard, the D-Link AirPlus ™ Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this icon appears GREEN, then...
  • Page 7: Appendix A - Using The Airplus ™ G Utility In Windows Xp

    Appendix A - Using the AirPlus G Utility in ™ Windows XP For Windows XP, if you wish to use the AirPlus G utility, please do the following steps. ™ Click the XP Networking icon to use the Zero Configuration Wireless Settings.
  • Page 8: Appendix B - Using The Airplus ™ G Utility

    • Channel: Displays the channel information. By default, the channel is set to 6 and selection is automatically determined by the DWL-G122. • Signal Strength: Represents the wireless signal strenght between the access point and the DWL-G122. • Link Quality: Displays the integrity of the wireless connection between the DWL-G122 and the Access Point.
  • Page 9 Appendix B - Using the AirPlus G Utility ™ (continued) • SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default. Make changes here to match the SSID on existing Wireless Router or Access Point.
  • Page 10: Appendix C - Ip Address Configuration

    Appendix C - IP Address Configuration To connect to a network, make sure the proper network settings are configured for the DWL-G122. Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with the DWL-G122.
  • Page 11: For Windows 2000 Users

    Go to Start > Settings > Network and Dial-up Connections > Double-click on Local Area Connection associated with the DWL-G122 > select Properties Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on the local network.
  • Page 12: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.

Table of Contents