Port Forwarding Rules - D-Link WBR-1310 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Rule:
Check the box to enabled the rule.
Name:
Enter a name for the rule.
IP Address:
Enter the IP address of the computer on your
local network that you want to allow the incoming
service to.
Start Port/
Enter the port or ports that you want to open.
End Port:
If you want to open 1 port, enter the same port
in both boxes.
Traffic Type:
Select TCP, UDP, or ANY.
D-Link WBR-1310 User Manual

Port Forwarding Rules

28