Network Filter - D-Link WBR-1310 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
Configure MAC
Select Disable MAC filters, allow MAC addresses
Filter:
listed below, or deny MAC addresses listed
below.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
DHCP Client:
Select a DHCP client from the drop-down menu
and click the arrow to copy that MAC Address.
D-Link WBR-1310 User Manual

Network Filter

30