D-Link Wireless Router Initial Setup Manual

START hERE:

ThERE ARE ThREE opERATing SySTEmS liSTEd bElow To Show inTRucTionS
on how To configuRE youR compuTER And bEgin ThE SETup pRocESS.
OptiOn 1: WindOWs Xp
®
LAN LAN
5V 5V 3A 3A RESET RESET
OptiOn 2: WindOWs Vista
®
OptiOn 3: WindOWs 7
OptiOn 1 - Xp
DAP-1360
1
LAN LAN
5V 5V 3A 3A RESET RESET
Begin by connecting the power cable to the DAP-1360. Then, connect your ethernet
cable to the device's LAN port on the back.
wireless router 1 2 3
4
wireless router 1 2 3 4 DIR-655
LAN LAN
5V 5V 3A 3A RESET RESET
When you have opened the "Network Connections" window, select and right-click
the "Local Area Connection" icon and click on properties. After the window has been
opened, look for the option "Internet Protocol" (TCP/IP) and click properties.
wireless router
OptiOn 2 - Vista
DAP-1360
1
LAN LAN
5V 5V 3A 3A RESET RESET
Connect the power cable to the router. Then connect your ethernet cable to the
DAP-1360's LAN port on the back.
wireless router 1
4
LAN LAN
5V 5V 3A 3A RESET RESET
wireless router 1 2 3 4 DIR-655
In the "Network Connections" window, right-click the LOCAL AREA CONNECTION
icon and click PROPERTIES. When the window opens, select "Internet Protocol
Version 4 (TCP/IPv4)" and click PROPERTIES.
wireless router
OptiOn 3 - Windows 7
DAP-1360
1
LAN LAN 5V 5V 3A 3A RESET RESET
Connect the power cable to the router. Then connect your ethernet cable to the
DAP-1360's LAN port on the back.
wireless router 1 2 3 4
4
wireless router 1 2 3 4 DIR-655
Set up the network and security settings to match your network settings. Refer to
the manual on the included CD for detailed information on this setup.
wireless router
©2009 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and MediaBridge are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Other trademarks or registered
trademarks are the property of their respective owners.
initiaL sEtUp GUidE
2
2
Once your PC is connected to the device, go to the computer's taskbar and click
on START, then select Control Panel.
4 DIR-655 DAP-1360
5
DAP-1360
Once you have opened the properties window, select the "Use the following IP
address" option. The text boxes below will allow you to type the manual IP address.
In the category "IP address" type, "192.168.0.51". Click the "Subnet Mask:" text box
and the address "255.255.255.0" will appear. You may leave the "Default Gateway,"
"Preferred DNS Server" and "Alternate DNS Server". Then click "OK".
1 2 3 4 DIR-655 DAP-1360
wireless router 1 2 3 4 DIR-655
2
wireless router 1 2 3 4 DIR-655
Once connected, go to the computer's taskbar and select START. Then, right-click
NETWORK and click PROPERTIES.
2 3 4 DIR-655 DAP-1360
5
DAP-1360
Once you have opened the properties window, select the "Use the following IP
address" option. The text boxes below will allow you to type the manual IP address.
In the category "IP address" type, "192.168.0.51". Click the "Subnet Mask:" text
box and the address "255.255.255.0" will appear. You may leave the "Default
Gateway," "Preferred DNS Server" and "Alternate DNS Server". Then click "OK".
1 2 3 4 DIR-655 DAP-1360
wireless router 1 2 3 4 DIR-655
2
Once connected, go to the computer's taskbar and select START. Then, right-click
NETWORK and click PROPERTIES.
wireless router 1 2 3 4 DIR-655
DIR-655 DAP-1360
5
DAP-1360
Once you have opened the properties window, select the "Use the following
IP address" option. The text boxes below will allow you to type the manual IP
address. In the category "IP address" type, "192.168.0.51". Click the "Subnet
Mask:" text box and the address "255.255.255.0" will appear. You may leave the
"Default Gateway," "Preferred DNS Server" and "Alternate DNS Server". Then
click "OK".
1 2 3 4 DIR-655 DAP-1360
DAP-1360
DAP-1360
DAP-1360
DAP-1360
noTE:
Before you begin, make sure you have administrative
permission to modify the computer's network settings.
3
In Control Panel, open "Network Connections".
6
You have successfully configured your computer to access the device's web-based
configuration. Please proceed to the Range Extender guide on the reverse side of
this guide.
3
In "Network and Sharing Center," click on "Manage Network Connections" on the
left side.
6
You have successfully configured your computer to access the device's web-based
configuration. Please proceed to the Range Extender guide on the reverse side of
this guide.
3
In "Network and Sharing Center," click on "Manage Network Connections" on the
left side.
6
You have successfully configured your computer to access the device's web-based
configuration. Please proceed to the Range Extender guide on the reverse side of
this guide.
DAP-1360
DAP-1360
DAP-1360
DAP-1360
DAP-1360