Page 2
Installation Remove top panel from wall-mount panel by unlatching each of the four side clasps.
Page 3
Installation Complete cable termination on each desired RJ45 module. Align the keystone latch upwards. Insert the assembled RJ45 modules into each port from the rear of the panel. Cable tie Solid cable...
Page 4
Installation Screw the wall-mount bracket into place where desired with user-supplied hardware. Upon installing all desired modules, mount the front panel back onto the bracket by clicking all four clasps into place.
Page 5
Installation Rotatable module instruction Positioning Rotate the bezel to desired direction until it clicks. Adjustment Press the clip-on bezel to release the bezel and change the direction.
Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: TRIPP LITE; 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping charges. Visit tripplite.com/support before sending any equipment back for repair.
Page 7
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Page 8
1111 W. 35th Street, Chicago, IL 60609 USA tripplite.com/support 22-11-188 9346F6_RevA...
Need help?
Do you have a question about the N062-012-KJ-WM and is the answer not in the manual?
Questions and answers