Bef o r e G et t i n g S t a rt e d
16
8. Copying Files and Disconnecting from a PC
1. While iAUDIO F1 is connected to a PC, run Windows Explorer or JetShell.
2. Copy the music files and other files to use with iAUDIO F1 in the iAUDIO drive.
3. When file copying is completed, click the @@ icon on the system tray.
4. When the following message pops up, click on it.
5. When the safe hardware removal message appears as shown below, disconnect the USB cable.
- For instructions on JetShell, see the JetShell manual in the enclosed CD.
- For Windows 98 and 98 SE operating systems, the safe hardware removal message may not appear. In this case, disconnect
the cable after confirming that the file transfer window is closed.
- When the following message appears, it does not mean there is any problem in the product. Just perform safe hardware
removal after a short while.
iAUDIO F1