Connecting To A Pc; Copying Files And Disconnecting From A Pc - Cowon iAUDIO M5 20GB User Manual

Connecting to a PC

1. Connect the USB port to the PC
with the supplied USB cable.
-You can connect using the separately-sold subpack (cradle).
-Never connect the USB cable and adapter to the device's USB port while the sub-pack (cradle) is in use because it can cause a
malfunction.
-If using a USB hub, normal functioning cannot be guaranteed. Please connect it to the back of the PC.
- A separate driver installation process is needed for Windows 98, and 98 SE.
- For driver installation process, please refer to 5. additional description on page 5.
- The maximum folder number and file number this product can recognize is 2,000 and 10,000 respectively.
Copying Files and Disconnecting
1. Open Windows Explorer while the iAUDIO M5 is connected to your PC.
2. Copy audio files, graphic files and other files to be used in iAUDIO M5 to the drive.
3. After saving the files, click the 3. After saving the files, click the 3. After saving the files, click the
4. Click the following popup message when it appears.
5. The safely remove hardware window comes up.
6. Click the OK button and then disconnect the USB cable.
- This product uses a hard disk and must confirm the safe removal of hardware before disconnecting.
- If the following message appears, it does not mean product failure. You may execute safe hardware removal after a few moments.
2. If the connection is correct, the
following figure appears on LCD.
icon in the PC tray.
Connect i n g t o a P C
3. You may confirm the newly
added drive with a Windows
Explorer.
11
iAUDIO M5