Getting Started; About Programs; Select A Program; Edit A Program - Clavia Nord Wave User Manual

10 |
Nord Wave User Manual v1.1
4

About Programs

Complete sound settings are stored in the Program
memory of the Nord Wave. this memory area consists of
8 Banks with 128 Programs each which makes a grand
total of 1024 Programs. Every Program can be edited
and replaced as you wish. a complete set of the factory
Programs are available on the Nord Wave dVd and on our
website.

Select a Program

1
Use the rotAry diAl to
select a Program.

Getting Started

2
To switch between Banks, press and hold Shift and then
the uP/doWN buttons that is located to the left of the
lcd.
the Bank is indicated by the
single digit to the left and the
program number by the digits
to the right in the LCd. Each
Program has a name and they are
also categorized in 17 different
categories.
3
If you reach the last or the first Pro-
gram in a Bank, you can switch to the
next bank by pressing the uP or the doWN button.
It's also possible to browse or select Programs by Cat-
•
egory or in an alphabetical order. this is described in
detail in the Sort Mode section on page 19.

Edit a Program

Editing a Program is just as easy as grabbing a knob and
change a setting, or press a button to select a differ-
ent setting. the knobs physical position isn't always as
the setting in the Program that is active, but as soon as
you start turning a knob, the parameter will snap to the
knob's position.
1
Turn e.g. the filter freq knob.
the parameter value will be shown briefly in the
LCd.