Clarion DXZ445 Owner's Manual page 9

"Z+ OFF" ➜ "B-BOOST" ➜ "IMPACT" ➜
"EXCITE" ➜ "CUSTOM" ➜ "Z+ OFF" ...
• B-BOOST : bass emphasized
• IMPACT : bass and treble
emphasized
• EXCITE : bass and treble empha-
sized mid de-emphasized
• CUSTOM : user custom
• Z+ OFF : no sound effect
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-
Enhancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; turning it counterclockwise adjusts
in the – direction.
●When "B-BST 0" is selected, you can adjust
the bass in the range of –3 to 3.
●When "IMPACT 0" is selected, you can adjust
the bass and treble in the range of –3 to 3.
●When "EXCITE 0" is selected, you can adjust
the bass and treble in the range of –3 to 3.
∗ Press and hold the [Z+] button for 2 seconds
or longer to change to the "CUSTOM" mode.
Bass/treble characteristics become flat and the
indication "Z+ FLAT" is shown in the display.
Press the [Z+] button again to change to the
"Z+ OFF" mode.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
● When "B-BOOST" is set
"S-VOL 0" ➜ "B-BOOST" ➜ "BAL 0" ➜
"FAD 0" ➜ Last function mode.
● When "IMPACT" is set
"S-VOL 0" ➜ "IMPACT" ➜ "BAL 0" ➜
"FAD 0" ➜ Last function mode.
● When "EXCITE" is set
"S-VOL 0" ➜ "EXCITE" ➜ "BAL 0" ➜
"FAD 0" ➜ Last function mode.
● When "CUSTOM" is set
"S-VOL 0" ➜ "BASS" ➜ "TREBLE" ➜
"BAL 0" ➜ "FAD 0" ➜ Last function mode.
● When "Z+ OFF" is set
"S-VOL 0" ➜ "BAL 0" ➜ "FAD 0" ➜ Last
function mode.
∗ If sub-woofer is effective "S-VOL 0" can be selected.
Adjusting the Subwoofer
When you default select one of mode (LPF50,
LPF80, LPF120).
1. Press the [A-M] button and select
"S-VOL 0".
2. Turning the [ROTARY] knob clockwise or
counterclockwise to adjust the subwoofer
volume.
The factory default setting is "S-VOL 0".
(Adjustment range: –6 to +6)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the
Z-Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
∗ The factory default setting is "B<G 0>".
(Adjustment range: –6 to +6)
3. Press the [a] or [d] button to select
"B<F 60>".
Turning the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is "B<F 60>".
(Adjustment 60/100/200 Hz)
4. Press the [a] or [d] button to select
"B<Q 1>".
Turning the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is "B<Q 1>".
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "TREBLE".
2. Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it
counterclockwise attenuates the treble.
∗ The factory default setting is "T<G 0>".
(Adjustment range: –6 to +6)
Basic Operations
13
DXZ445