Safety; Symbols Used; Warnings; Notes On Product Marking - MICRO-EPSILON ILD1 20 Series Operating Instructions Manual

1

Safety

1.1

Symbols used

System operation assumes knowledge of the operating instructions.
The following symbols are used in these operating instructions:
Indicates a situation which, if not avoided, may result in minor or moderate injury.
CAUTION
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates a tip for users.
Indicates hardware or a software button/menu.
Measurement
1.2

Warnings

Connect the power supply according to the regulations for electrical equipment.
CAUTION
●
●
The supply voltage must not exceed the specified limits.
●
Avoid shocks and impacts to the controller.
●
1.3

Notes on product marking

1.3.1

CE marking

The following apply to the product:
Directive 2014/30/EU ("EMC")
●
Directive 2011/65/EU ("RoHS")
●
Products which carry the CE marking satisfy the requirements of the EU Directives cited and the relevant applicable
harmonized European standards (EN).
The product is designed for use in industrial and laboratory environments.
The EU Declaration of Conformity and the technical documentation are available to the responsible authorities according
to the EU Directives.
1.3.2

UKCA marking

The following apply to the product:
SI 2016 No. 1091 ("EMC")
●
SI 2012 No. 3032 ( „RoHS")
●
Products which carry the UKCA marking satisfy the requirements of the directives cited and the relevant applicable
harmonized standards.
The product is designed for use in industrial and laboratory environments.
The UKCA Declaration of Conformity and the technical documentation are available to the responsible authorities accord­
ing to the UKCA Directives.
1.4

Intended use

The controller is designed for use in industrial and laboratory applications.
Dual Processing Unit
Risk of injury
Damage to or destruction of the controller
Damage to or destruction of the controller
Damage to or destruction of the controller
Safety
Seite 6