Table of Contents
Advertisement
3.2.1 Virtual Server
If you want to host a HTTP/FTP server or allow remote access to your IP camera on the
LAN from the Internet, you must set up port forwarding rules on the router in order to
direct incoming traffic to the server or IP Camera. This page allows you to set up to 20
port forwarding rules for the specified applications.
Parameter
Well known services
Server IP
Service Ports
Protocol
Description
You can select a pre-defined service from the list of well known
services, select a schedule rule, and the ID you wish to fill the
settings in. Click Copy to and the settings you selected will be
filled into the specific ID.
This is the private IP address of the server behind the NAT
firewall. Note: You must give your LAN client a fixed/static IP
address for Virtual Server to work properly.
The range of ports to be forwarded to the Server IP. You can fill in
a single port, such as 21, 80 or a range, such as 2000-2999.
This is the protocol type to be forwarded. You can choose to
forward "TCP" or "UDP" packets only or select "Both" to forward
both "TCP" and "UDP" packets.
56
Advertisement
Table of Contents
