HOMCOM FRO2716-48Z Instruction Manual page 6

: Press this button to enter standby mode – the indicator light will turn on.
Now, you can select the desired functions. Press the button again to turn
off the heater.
: Adjusting the time function:
- Press this button and the 'SUN' on the LED screen will start flashing.
- Use the ↑ and ↓ buttons to select the desired date, then press + to
confirm. To cancel, press-.
- After setting the desired date, press ++ for the 'hour' position.
- Use + or - to select the desired hour.
- Press ++ for the 'minute' position.
- Use + or - to select the desired minute.
- Press either ++ or OK to complete the setting.
NOTE: If there is a power interruption, the date will automatically reset.
: Automatic time adjustment:
- Press this button and the time serial number will flash. The 'ON' on the
LED screen will light up.
- Use the + or -to select the desired serial number.
- Press ++ gain – the 'SUN' on the LED screen will start flashing.
- Use ↑ or ↓ to select the desired date. Press +to confirm or -to cancel.
- After setting the desired date, press ++ or the 'hour' position.
- Press + r -to select the desired hour.
- Press ++ or the 'minute' position.
- Press +or -to select the desired minute.
- Press again. The 'ON' will turn off and the 'OFF' will light up. Set the
shutdown time in the same way as before.
- Finally, set the temperature at which the heater will stop heating. Press
+or -to select the desired temperature. Once the desired ambient
temperature is reached, the heater will automatically stop heating.
: Window detection function
- Press this button to turn on the 'window detection' function.
- If the room gets colder due to open windows or doors while the heater is
on, it will automatically stop heating to save energy.
- The corresponding icon on the screen will flash.
- Press the button again to turn off the 'window detection' function –
normal heating will resume.
: Reset function – press this button to clear the timing settings.
: Heating function – press this button to turn on the heating function.
Press again to turn it off.
: Timer function – press this button to turn on the timer function. Press
again to turn off.
Note: When using the timer function, the machine will work based on the
settings chosen before activating the timer. Adjust the desired settings,
5