Subscribe to Our Youtube Channel
Related Manuals for Milwaukee M18 FUEL FCS552
Summary of Contents for Milwaukee M18 FUEL FCS552
- Page 1 OPERATOR'S MANUAL Cat. No. M18 FCS552 M18 FUEL™ 165MM CIRCULAR SAW WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. -
Page 3: Specific Safety Rules For Circular Saws
• When battery pack is not in use, keep it away Never use damaged or incorrect blade washers • from other metal objects, like paper clips, coins, or bolt. The blade washers and bolt were specially keys, nails, screws or other small metal objects, designed for your saw, for optimum performance that can make a connection from one terminal and safety of operation. -
Page 4: Functional Description
Tool or a trained professional for ® additional information or training. • Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE ® service facility for a replacement. Some dust created by power sanding, WARNING... -
Page 5: Specifications
Then, check regulatory requirements. the operation again by starting with step 1. • If the guard still does not immediately spring Do not dispose of electric tools back into place, contact a MILWAUKEE ® service together with... -
Page 6: Adjusting Depth
Adjusting Bevel Angle 4. To install a blade, place the blade on the spindle with the teeth pointing in the same direction as Remove battery to avoid starting WARNING the arrow on the lower guard. Release the lower the tool. 2. -
Page 7: Troubleshooting
When ripping widths authorised MILWAUKEE service facility. The brake ® greater than 102 mm (4"), clamp or tack 25 mm (1") -
Page 8: Maintenance
Repeat the above steps for each side tool operation. Return the tool, battery pack, and of the opening. Use a Sawzall Reciprocating charger to a MILWAUKEE service facility for repair. ® Saw, Jigsaw or small hand saw to finish the If the tool does not start or operate at full power with corners if they are not completely cut through. - Page 9 Repairs For repairs, return the tool, battery pack and charger to the nearest authorised service centre. ACCESSORIES Use only recommended accesso- WARNING ries. Others may be hazardous. For a complete listing of accessories, go online to milwaukeetool.com.au / milwaukeetool.co.nz or contact a distributor.
- Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18 FUEL FCS552 and is the answer not in the manual?
Questions and answers