Related Manuals for Milwaukee M12 FUEL FCS442
Summary of Contents for Milwaukee M12 FUEL FCS442
- Page 1 OPERATOR'S MANUAL Cat. No. M12 FCS442 M12 FUEL™ 140MM CIRCULAR SAW WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. -
Page 3: Specific Safety Rules For Circular Saws
Never damaged incorrect blade • When battery pack is not in use, keep it away • washers or bolt. The blade washers and bolt from other metal objects, like paper clips, coins, were specially designed for your saw, for optimum keys, nails, screws or other small metal objects, performance and safety of operation. -
Page 4: Specifications
Tool or a trained professional for ® additional information or training. • Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a ® replacement. Some dust created by power sanding, WARNING... -
Page 5: Inserting/Removing The Battery
1. regulatory requirements. • If the guard still does not immediately spring back into place, contact a MILWAUKEE service ® Do not dispose of electric tools facility for repairs. together... -
Page 6: Adjusting Depth
4. To adjust the degree setting, loosen the bevel Adjusting Depth adjusting knob. Turn the bevel adjustment screw Remove battery to avoid starting WARNING in or out until the blade is at a 90° angle with the the tool. shoe. To adjust the depth 5. -
Page 7: Troubleshooting
If the brake misses must be tight and secure before making cut. If frequently, the saw needs servicing by an blade adjustment shifts while cutting, it may cause authorised MILWAUKEE service facility. The brake ® binding and kickback. - Page 8 1. Beginning at a corner, line up the sight line with APPLICATIONS your cutting line. Tilt the saw forward, firmly fixing Cutting Large Panels the front of the shoe on the workpiece. The blade Large panels and long boards sag or bend if they are should be just above cutting line, but not touching it.
-
Page 9: Maintenance
Return the tool, battery pack, and charger to a MILWAUKEE service facility for repair. ® If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. - Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M12 FUEL FCS442 and is the answer not in the manual?
Questions and answers