Subscribe to Our Youtube Channel
Related Manuals for Milwaukee M18 FUEL FMCS66
Summary of Contents for Milwaukee M18 FUEL FMCS66
- Page 1 OPERATOR'S MANUAL Cat. No. M18 FUEL™ METAL CUTTING CIRCULAR SAW WARNING To reduce the risk of injury, user must read and understand operator’s manual.
-
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. - Page 4 • When battery pack is not in use, keep it away Further safety instructions for all saws from other metal objects, like paper clips, coins, Kickback causes and related warnings keys, nails, screws or other small metal objects, -Kickback is a sudden reaction to a pinched, jammed that can make a connection from one terminal or misaligned saw blade, causing an uncontrolled saw to another.
-
Page 5: Functional Description
Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact MILWAUKEE® Tool or a trained professional for additional information or training. • Maintain labels and nameplates. These carry im- portant information. -
Page 6: Specifications
1........-17°C to 51°C (0°F to 125F) • If the guard still does not immediately spring back No Load RPM ..........4000 into place, contact a MILWAUKEE® service Blade Size ........... 203mm (8") facility for repairs. Arbor ............16mm (5/8") Depth of cut ......0 to 65mm (2-9/16") -
Page 7: Adjusting Depth
4. Slide the lower guard lever up to raise the lower OPERATION guard. Remove the blade from the spindle. Always To reduce the risk of injury, always WARNING clean the spindle, upper guard and lower guard to wear proper eye protection marked remove any dirt and dust. -
Page 8: Electric Brake
Occasionally the brake may miss completely. If the brake misses frequently, the saw needs servicing by an authorised MILWAUKEE® service facility. The brake is not a substitute for the guard, and you must always wait for the blade to stop completely before removing the saw from the workpiece. -
Page 9: Troubleshooting
Return the tool, battery pack, and charger to a MILWAUKEE® service facility for repair. After six months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE®... - Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18 FUEL FMCS66 and is the answer not in the manual?
Questions and answers