Addictive Desert Designs RACE Series Installation Manual

TOOLS
(Torx) T55
(Allen) 7/32
(Wrench) 9/16
(Socket) 9/16
Ratchet
Step Up Drill Bit
Wire Crimping Tool
Razor Blade
SKILL
-Medium/Skilled
**This installation requires wiring knowledge for best results**
-BEFORE YOU INSTALL THIS KIT-
Read and understand all instructions
warnings, cautions, & notes contained in this
installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical
and lifting of vehicle if required for installation of this
product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel
that you are capable of performing this install please
take this product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
24/TOYOTA TACOMA
RACE SERIES CHASE RACK
REQUIRED
LEVEL
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Customer Service (480) 671-0820
Addictive desert designs is not responsible for any
,
bodily injury or harm to you or your vehicle as a result
of an improper install.
Proper installation of this kit required knowledge of
the factory recommended procedures for removal and
installation of original equipment components.
We recommend that the factory shop manual and
any special tools needed to service your vehicle be
on hand during the installation. Installation of this kit
without proper knowledge of the factory recommended
procedures may affect the performance of these
INSTALLATION
C670013060103
- 1.5 hours for OEM Removal/Bumper Install
**Labor Rates are based on a vehicle with no pre-existing damage. Wiring
labor is based on a standard wiring procedure with light switches installed
in an easily accessible location. Custom light triggering or switch mounting
location will result in a greater labor charge.**
TIME REQUIRED
-1 Additional Hour to Wire Lights
INCLUDED IN KIT
8- MPL0022 Channel Nut
2- 3/8-16 X 1" Carriage Bolt
8- 3/8-16 X 1" Button Head Bolt
10- 3/8" Flat Washer
2- 3/8-16" Nylon Lock Nut
1- Toggle Switch
4- SRS0163 Bed Spacers
components and the safety of the vehicle.
Inspect all contents of this package to make sure
product is not damaged and all installation hardware
has been included. If parts are missing from kit, please
be prepared to provide the following information:
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
*ALWAYS WEAR EYE PROTECTION
WHEN OPERATING POWER TOOLS*
guide