-
Update Firmware: Click this button to update the firmware
of the selected print server.
-
Show Web Setup: Click this button to open your web
browser and launch the Configuration Utility. Alternately,
you can double-click the print server in the Device List to
launch the Configuration Utility.
-
Factory Reset: Click this button to reload the factory settings
of the print server.
-
Discover Device: Click this button to search the connected
print server again.
-
About: Click this button to bring up a window containing the
basic information of PS-Utility.
-
Close: Click this button to exit PS-Utility.
3. Information Field: Display the basic information of the selected
print server in the Device List.
4. Status Bar: Display the system status.
- 17 -
W
C
EB
ONFIGURATION
You can access and manage the Print Server through: 1) the enclosed
software PS-Utility, and 2) a web browser. This chapter describes
the second method – the Web Configuration Utility, and explains how
to set up your print server with the web browser.
Web Configuration Utility
First, launch your web browser (such as the Internet Explorer 6.0 used
in this manual).
Then, type http://192.168.0.1 (the default IP
address) in the Address bar and press [Enter] to enter the Management
screen of the Configuration Utility.
TIP: The computer's IP address must correspond with the print
server's IP address in the same segment for the two devices to
communicate.
Extensive knowledge of LAN will be helpful in
configuring the print server.
- 18 -
4