Advertisement
Running the Show PSUs Command
▶
Run the following command to display information about the PSUs:
sudo nvsm show psus
The output shows information for each PSU. Look for any that do not report Status_Health=OK.
Viewing PSUs from the BMC web user interface
1.
Access the BMC web user interface and select Sensors from the left hand column.
▶
Confirm PSU presence:
▶
Confirm power output:
▶
Confirm fan speeds:
3.2. Identifying the Failed Power Supply
NVIDIA DGX H100/H200 Service Manual
15
Advertisement
Need help?
Do you have a question about the DGX H200 and is the answer not in the manual?