Bluetooth Settings; Hardware Settings; Accessibility Settings - TRENDnet TBW-105UB User Manual

B S
LUETOOTH ETTINGS

Hardware Settings

The Hardware tab of the Bluetooth Configuration Panel provides basic
information about the Bluetooth hardware installed on this computer:
Devices:
Name: the name of the device, e.g., WIDCOMM Bluetooth
Device
Type: the type of device, e.g., USB.
Device Properties:
Device status: indicates that the device is operating properly or
that there is a problem/conflict.
Manufacturer: the name of the company that manufactured the
device.
Firmware Revision: the firmware version number.
Device Address: the Bluetooth Device Address (BDA or
BD_Addr) assigned to this device when it was manufactured.
HCI Version: the version number of the Bluetooth Specification
that the Host Controller Interface complies with.
HCI Revision: the revision number of the Bluetooth Specification
that the Host Controller Interface complies with.
LMP Version: the version number of the Bluetooth Specification
that the Link Manager Protocol complies with.
LMP Sub Version: the sub-version number of the Bluetooth
Specification that the Link Manager Protocol complies with.
62

Accessibility Settings

The Accessibility tab of the Bluetooth Configuration Panel lets you specify
whether remote devices may access this computer, which remote devices
have access, and whether an audio warning is played when a Personal
Identification Number (PIN code) is required.
Allow other devices to discover this computer
Select "Let other Bluetooth devices discover this computer" to permit remote
Bluetooth devices to find and report this computer.
If "Allow No devices" (below) is selected, this option is not available.
Control the types of devices that are allowed to connect to this computer
From the "Devices allowed connecting to this computer" shortcut-menu,
select:
No devices -- no remote devices are permitted to initiate a connection
with this computer. However, this computer can still initiate
connections with remote Bluetooth devices.
All devices -- all remote devices are permitted to connect to this
computer.
Connections are subject to additional security restrictions, such as
authentication and authorization that may be required by the individual
services provided by this computer.
Only paired devices -- only devices that have been paired with this
computer are allowed to connect to it.
Only devices listed below -- only the listed devices are allowed to
connect to this computer (see Accessibility, adding and deleting
devices).
63