Bluetooth Serial Port Service; Dial-Up Networking Service - TRENDnet TBW-105UB User Manual

Configure the Audio Gateway Service
From the System tray, right-click the Bluetooth icon, select Advanced
Configuration Local Services, and then double-click the Audio Gateway
service.
Set the desired options for the service, and then click OK.

Bluetooth Serial Port Service

The Bluetooth Serial Port service allows a remote Bluetooth device to
establish a wireless serial connection with this computer. The wireless serial
connection may be used by applications as though a physical serial cable is
connecting the devices.
To establish a Bluetooth Serial Port connection
The connection must be initiated from the remote device by the Bluetooth
Serial Port application.
Determine the communications port being used by this computer for the
Bluetooth Serial Port
In the System tray, right-click the Bluetooth icon, select Advanced
Configuration, and then click the Local Services tab. The COM port assigned
to this service is the last item in the Bluetooth Serial Port service row.
Add a Bluetooth Serial Port
The Bluetooth Serial Port service has one default Bluetooth Serial Port, but
additional Bluetooth Serial Ports can be added as needed.
52
To add a port
1. From the Bluetooth Configuration Panel, Local Services tab, click Add
Serial Service.
2. In the properties dialog box, modify the properties.
3. Enter a unique name (less than 99 alphanumeric characters).
4. Select secure connection (optional)
5. Select Startup Automatically (optional)
6. From the COM Port shortcut menu select a communications port that is
not assigned to any other service.
7. Click OK.
To remove a Bluetooth Serial Port
From the Bluetooth Configuration Panel, Local Services tab, select the port
to be removed and then click Delete.
NOTE: The Delete button is only available when a Bluetooth Serial Port is
selected.

Dial-up Networking Service

The Bluetooth Dial-up Networking service makes it possible for a remote
Bluetooth device to use a modem that is physically connected to this
computer. The remote device can then access the Internet or logon to a
remote network.
Configure the Dial-up Networking service
From the System tray, right-click the Bluetooth icon, select Advanced
Configuration Local Services, and then double-click the Dial-up
Networking service.
Select the physical modem to be used from the Modems: shortcut
menu.
Set the desired options for the service, and then click OK.
53