Audio Gateway - TRENDnet TBW-105UB User Manual

Create a Bluetooth HID connection
Open a connection to a Bluetooth Human Interface Device using one of these
techniques:
From My Bluetooth Places
Using the Bluetooth Setup Wizard
Once an HID connection is established, that connection will be maintained. If
the computer is shut down, when the computer is turned on again the
connection will be re-established automatically.
Close an HID connection
Under normal circumstances, there is no reason to close an HID connection
If, the connection must be closed, double click My Bluetooth Places, click
Bluetooth from the menu bar and select search for devices. Double-click on
the desired Bluetooth device to display a list of services. Right click on the
service and click disconnect.
34

Audio Gateway

Overview
The Audio Gateway Application allows a remote Bluetooth device to use this
computer's microphone and speakers as the remote device's audio input and
output devices.
Create a Bluetooth Audio Gateway connection
Open a connection to the Audio Gateway service that is provided by another
Bluetooth device using one of these techniques:
1. System tray, Bluetooth icon
2. From My Bluetooth Places
3. Using the Bluetooth Setup Wizard
Close an audio gateway connection
There are two ways to close an audio gateway connection:
1. If the connection was established via the Bluetooth icon in the System
tray; click the Bluetooth icon, select Quick Connect, Audio Gateway and
then select the device that is providing the service (active connections
have a checkmark in front of them). Or
2. Double click My Bluetooth Places, click Bluetooth from the menu bar
and select search for devices. Double-click on the desired Bluetooth
device to display a list of services. Right click on the service and click
disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Audio Gateway >
General tab provides options to configure:
The application name -- to change it, highlight the existing name and
enter the new name.
35