Bluetooth Serial Port; D Ial - Up N Etworking - TRENDnet TBW-105UB User Manual

Enable or disable secure connection. To enable secure connection,
place a check mark in the box.

Bluetooth Serial Port

The Bluetooth Serial Port application allows this computer to establish a
wireless serial connection with a remote Bluetooth device.
The applications on both this computer and the remote device must be
configured to send and receive data to and from the communications port
(COM port) assigned to the Bluetooth serial port. The wireless serial
connection may then be used by the applications as though a physical serial
cable is connecting the devices.
Create a Bluetooth Serial Port connection
Establish a connection using one of these techniques
System tray, Bluetooth icon
From My Bluetooth Places
Using the Bluetooth Setup Wizard
Close a Bluetooth Serial Port connection
There are two ways to close a Bluetooth Serial Port connection:
1. If the connection was established via the Bluetooth icon in the System
tray; click the Bluetooth icon, select Quick Connect, Bluetooth Serial
Port and then select the device that is providing the service (active
connections have a checkmark in front of them).
2. Double click My Bluetooth Places, click Bluetooth from the menu bar
and select search for devices. Double-click on the desired Bluetooth
device to display a list of services. Right click on the service and click
disconnect.
Configure
The Bluetooth Configuration Panel
Serial Port General tab provides the following configurable options:
Client Applications Bluetooth
36
The application name -- to change it, highlight the existing name and
enter the new name.
Enable or disable secure connection. To enable secure connection,
place a checkmark in the box.
The communications port (COM port) to be used.
Dial-up Networking
Overview
The Bluetooth Dial-up Networking application allows this computer to use a
modem that is physically connected to a remote device to access the Internet,
and logon to a remote network.
Create a Dial-up Networking connection
Open a connection to the Dial-up Networking service that is provided by
another Bluetooth device using one of these techniques:
System tray, Bluetooth icon
From My Bluetooth Places
Using the Bluetooth Setup Wizard
After the Bluetooth dial-up networking connection is established it can be
used the same way as any other networking connection. For example, you
can open a browser and explore the World Wide Web, if the remote computer
has Internet access.
Close a Dial-up Networking connection
There are two ways to close Dial-up Networking connection:
1. If the connection was established via the Bluetooth icon in the System
tray, right-click the Bluetooth icon and select Quick Connect. Select
Dial-up Networking and then select the device that is providing the
service (active connections have a checkmark in front of them).
2. Double click My Bluetooth Places, click Bluetooth from the menu bar
and select search for devices. Double-click on the desired Bluetooth
device to display a list of services. Right click on the service and click
disconnect.
37