Audio Gateway Service - TRENDnet TBW-105UB User Manual

Example
Both Authentication and Authorization request notifications are dependent on
whether Secure Connection is enabled for an individual service.
An example of how notifications might work when a remote device attempts
to access a service on this computer, if all notifications are enabled:
1. Authentication: a balloon notification (audio optional) appears to prompt
for a PIN code. If the PIN code does not match the code entered on the
remote device, the connection will not be allowed. Once the remote
device has been authenticated this notification will not appear again,
unless you unpair the devices
2. Authorization: a balloon notification appears and/or a sound file provides
audio notification that a remote device is attempting to access a
Bluetooth service on this computer. Click the balloon to proceed. A
dialog box appears that offers the option of letting the connection
proceed this time only or to always allow this particular remote device to
use the service it is attempting to access.
3. Once a connection has been authorized, an additional visual and/or audio
notification may appear (if enabled). The purpose of the notification is to
alert the user that a connection has been established.
After the two devices are paired (step 1, above), the authentication
notification will no longer appear when a connection is attempted.
If "Always allow..." is enabled during the authorization process (step 2,
above), the authorization notification will not appear in future connection
attempts.
Connection notification (step 3, above) only happens if it has been enabled
on the Notifications tab of the individual service being accessed.
50
Service Access Notification
"Notifications" lets you associate a sound (Windows *.wav file) and/or a
visual indication with access attempts by remote devices.
A different notification sound can be associated with each local Bluetooth
service.
Associate a sound with service access
From the Bluetooth Configuration Panel, Local Services tab:
1. Double-click a service name and then select the Notifications tab.
2. Check the desired options; visual and sound may both be selected for
a single event.
3. Choose a sound; click the Browse button and navigate to the sound
file (*.wav) to be used for notification.
To preview the sound file, click the play button.
4. Click OK to close the dialog box.

Audio Gateway Service

The Bluetooth Audio Gateway service allows this computer to use a remote
Bluetooth device's microphone and speakers as this computer's input and
output devices.
For example, if this computer has voice recognition capabilities, a Bluetooth
headset might be used as the audio input device.
Hardware Requirements
The Bluetooth radio on both this computer and the remote device must
support audio.
The remote device handles both audio input and output for this
computer; therefore, this computer does not require a sound card,
microphone or speakers.
51