Download Print this page

Advertisement

Quick Links

EEM48331L
EN
Dishwasher
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the EEM48331L and is the answer not in the manual?

Questions and answers

Summary of Contents for Electrolux EEM48331L

  • Page 1 EEM48331L Dishwasher User Manual...
  • Page 2: Table Of Contents

    14. ENVIRONMENTAL CONCERNS..............29 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    (average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 14 place settings.
  • Page 5: Water Connection

    ENGLISH • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. •...
  • Page 6: Installation

    Authorized Service Centre to replace it with the new one. www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
  • Page 7: Product Description

    ENGLISH 5 mm 4. PRODUCT DESCRIPTION Ceiling spray arm Upper spray arm...
  • Page 8: Control Panel

    Lower spray arm Upper basket Filters Cutlery drawer Rating plate The graphic is a general overview. For more details, Salt container refer to other chapters or Air vent documents provided with the Rinse aid dispenser appliance. Detergent dispenser Lower basket 4.1 Beam-on-Floor...
  • Page 9: Programme Selection

    ENGLISH selection for a normally soiled indicates the most dishwashing load. environmentally friendly programme 5.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐ ing. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use".
  • Page 10: Glass Care

    The option increases the The option prevents rapid changes in the wash temperature and duration. dishwashing temperature of the selected programme and reduces it to 45 °C. GlassCare GlassCare prevents delicate load, glassware in particular, from damaging. 6.4 Programmes overview Pro‐...
  • Page 11: Consumption Values

    ENGLISH Pro‐ Dishwash‐ Degree of Programme phases EXTRAS gramme er load soil Machine For cleaning the appliance • Cleaning 70 °C Not applicable Care interior. Refer to "Care • Intermediate rinse and Cleaning". • Final rinse • AirDry 1) Automatic door opening during the drying phase. Refer to "Basic settings". Consumption values Water (l) Energy (kWh)
  • Page 12 Number Settings Values Description End sound Activate or deactivate the acoustic signal Off (default) for the end of a programme. Auto door open On (default) Activate or deactivate the AirDry. Key tones On (default) Activate or deactivate the sound of the buttons when pressed.
  • Page 13: The Water Softener

    ENGLISH 7.2 The water softener • The bar of the ECOMETER dedicated to the chosen setting is The water softener removes minerals on. The other bars are off. from the water supply, which would have • The current setting value flashes. a negative effect on the washing results 3.
  • Page 14: The Rinse Aid Empty Notification

    All the consumption values Water softener Amount of water mentioned in this section are level determined in line with the currently applicable standard in laboratory conditions with water hardness 2.5mmol/L (water softener: level 3) according to the regulation: 2019/2022 .
  • Page 15: Before First Use

    ENGLISH When AirDry opens the door, Beam-on-Floor might not be completely visible. To see if the programme is complete, look at the control panel. 7.6 Key tones The buttons on the control panel make a click sound when you press them. You can deactivate this sound.
  • Page 16: How To Fill The Salt Container

    8.2 How to fill the rinse aid How to fill the salt container dispenser 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time).
  • Page 17 ENGLISH 9.1 Using the detergent 2. Activate applicable EXTRAS if desired. 3. Close the appliance door to start the programme. 9.3 How to select and start the programme Pre-rinse 1. To select Pre-rinse, press and hold for 3 seconds. • The light related to the button is •...
  • Page 18: How To Delay The Start Of A Programme

    9.5 How to start the AUTO The appliance returns to the programme selection. Sense program Make sure that there is 1. Press detergent in the detergent • The light related to the button is dispenser before you start a new programme.
  • Page 19: Hints And Tips

    ENGLISH 10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment. designed for dishwasher.
  • Page 20: Before Starting A Programme

    4. When the programme is completed, ornamented porcelain and adjust the water softener according unprotected carbon steel. This can to the water hardness in your area. cause them to crack, warp, discolour, 5. Adjust the released quantity of rinse pit or rust.
  • Page 21: External Cleaning

    ENGLISH on the packaging. Do not put dishes • Do not use abrasive products, in the baskets. abrasive cleaning pads or solvents. 2. Press and hold simultaneously 11.5 Cleaning the filters for about 3 seconds. The filter system is made of 3 parts. The indicators flash.
  • Page 22: Cleaning The Lower Spray Arm

    11.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.
  • Page 23: Cleaning The Upper Spray Arm

    ENGLISH 11.7 Cleaning the upper spray 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the Do not remove the upper spray arm. If delivery tube (A), turn the mounting the openings in the spray arm are element (B) counterclockwise and clogged, remove the remaining particles...
  • Page 24: Troubleshooting

    12. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code.
  • Page 25 ENGLISH Problem and alarm code Possible cause and solution The temperature of the wa‐ • Make sure that the temperature of the inlet water ter inside the appliance is does not exceed 60°C. too high or malfunction of • Switch the appliance off and on. the temperature sensor oc‐...
  • Page 26 Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneous‐ cuit-beaker. ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use.
  • Page 27 ENGLISH Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appliance. Activate the function AirDry to set the automatic opening of the door and to improve the drying performance. • There is no rinse aid or the dosage of rinse aid is not sufficient.
  • Page 28: Technical Information

    Problem Possible cause and solution Limescale deposits on the • The level of salt is low, check the refill indicator. tableware, on the tub and on • The cap of the salt container is loose. the inside of the door.
  • Page 29: Environmental Concerns

    ENGLISH the rating plate of the appliance. Refer to For more detailed information about the the chapter "Product description". energy label, visit www.theenergylabel.eu. 14. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it.
  • Page 32 www.electrolux.com/shop...