Advertisement

Quick Links

EEM48301L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EEM48301L

  • Page 1 EEM48301L Dishwasher User Manual...
  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............27 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
  • Page 5 ENGLISH 2.4 Use cable. Should the mains cable need to be replaced, this must be carried out • Do not put flammable products or by our Authorised Service Centre. items that are wet with flammable • Connect the mains plug to the mains products in, near or on the appliance.
  • Page 6: Product Description

    2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply.
  • Page 7: Control Panel

    ENGLISH • When the appliance has a When AirDry is activated malfunction, the red light flashes. during the drying phase, the Beam-on-Floor is off when projection on the floor may the appliance is deactivated. not be completely visible. To see if the cycle is finished, check the control panel.
  • Page 8: Programme Selection

    Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Refer to "Programme selection". 5. PROGRAMME SELECTION 5.1 MY TIME energy and water consumption for crockery and cutlery with normal soil.
  • Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of Programme phases EXTRAS load soil Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry • Prewash Not applicable Pre-rinse Crockery, Fresh, lightly •...
  • Page 10: Basic Settings

    Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 11.0 0.627 Pre-rinse 0.040 11.5 0.873 1h 30min 11.5 0.991 2h 40min 10.9 1.073 10.5 0.848 AUTO Sense 10.9 1.073 Machine Care 0.655 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 11 ENGLISH Number Settings Values Description Latest pro‐ Enable or disable the automatic selec‐ gramme selec‐ Off (default) tion of the most recently used pro‐ tion gramme and options. 1) For more details, refer to the information provided in this chapter. You can change the basic settings in How to enter setting mode setting mode.
  • Page 12 6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
  • Page 13 ENGLISH In case of the high water softener setting, tablets only, it is possible to deactivate it may occur also in the middle of the the notification for refilling rinse aid. programme, before the rinse (twice However, for best drying performance, during a programme).
  • Page 14: Before First Use

    6.6 Key tones CAUTION! Do not try to close the The buttons on the control panel make a appliance door within 2 click sound when you press them. You minutes after automatic can deactivate this sound. opening. This can cause damage to the appliance.
  • Page 15: Daily Use

    ENGLISH CAUTION! The compartment (A) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 6. Turn the cap of the salt container 1. Press the release button (D) to open clockwise to close the salt container.
  • Page 16 8.4 How to activate EXTRAS 2. Put the detergent, in powder or tablets, in the compartment (A). 1. Select a programme using MY TIME 3. If the programme has a prewash selection bar. phase, put a small quantity of 2.
  • Page 17: Hints And Tips

    ENGLISH 8.9 Opening the door while the 2. Press repeatedly until the display appliance operates shows the desired delay time (from 1 to 24 hours). Opening the door while a programme is The light related to the button is on. running stops the appliance.
  • Page 18 • You can use dishwasher detergent, • Make sure that the water softener rinse aid and salt separately or you level is correct. If the level is too high, can use the multi-tablets (e.g. ''All in the increased quantity of salt in the 1'').
  • Page 19: Care And Cleaning

    ENGLISH 9.6 Unloading the baskets • Do not wash in the appliance items that can absorb water (sponges, 1. Let the tableware cool down before household cloths). you remove it from the appliance. Hot • Put hollow items (cups, glasses and items can be easily damaged.
  • Page 20 CAUTION! If unable to remove the foreign objects, contact an Authorised Service Centre. 1. Disassemble the filters system as 2. Remove the filter (C) out of filter (B).
  • Page 21 ENGLISH 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance.
  • Page 22: Troubleshooting

    (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not •...
  • Page 24 Problem and alarm code Possible cause and solution The level of water inside • Switch the appliance off and on. the appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
  • Page 25 ENGLISH The PNC can be found on the rating WARNING! plate on the appliance door. You can We do not recommend using also check the PNC on the control panel. the appliance until the Before checking the PNC, make sure the problem has been appliance is in the programme selection.
  • Page 26 Problem Possible cause and solution Unusual foam during wash‐ • Use the detergent designed specifically for dish‐ ing. washers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery.
  • Page 27: Technical Information

    ENGLISH 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C Cold water or hot water...
  • Page 28 www.electrolux.com/shop...

Table of Contents