Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux EEM69300IX
Summary of Contents for Electrolux EEM69300IX
- Page 1 EEM69300IX Dishwasher User Manual...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............26 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 4: Safety Instructions
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 15 place settings. • If the supply cord is damaged, it must be replaced by •... - Page 5 ENGLISH 2.4 Use • Make sure not to cause damage to the mains plug and to the mains • Do not put flammable products or cable. Should the mains cable need to items that are wet with flammable be replaced, this must be carried out products in, near or on the appliance.
-
Page 6: Product Description
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply. -
Page 7: Control Panel
ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is al‐ ways off while the programme operates. Rinse aid indicator. -
Page 8: Programmes
5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal, • Prewash • ExtraPower cutlery, pots, lightly • Dishwashing 50 °C •... - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil • Prewash 1) This programme offers the most efficient use of water and energy consumption for crock‐ ery and cutlery with normal soil. This is the standard programme for test institutes. This pro‐ gramme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
-
Page 10: Options
6. OPTIONS prevents rapid changes in the Desired options must be dishwashing temperature of the selected activated every time before programme and reduces it to 45 °C. you start a programme. It is not possible to activate How to activate GlassCare or deactivate options while a programme is running. - Page 11 ENGLISH 7.2 The water softener After activation, the appliance is in programme selection mode by default. If The water softener removes minerals not, set the programme selection mode from the water supply, which would have the following way: a negative effect on the washing results and on the appliance.
- Page 12 All the consumption values Water softener Amount of water mentioned in this section are level determined in line with the currently applicable standard in laboratory conditions with water hardness 2.5mmol/L (water softener: level 3) according to the regulation: 2019/2022 regulation.
-
Page 13: Before First Use
ENGLISH When AirDry opens the door, the display How to set the rinse aid level shows the remaining time of the running programme. Make sure the appliance is in user mode. CAUTION! 1. Press Do not try to close the •... - Page 14 8.1 The salt container 8.2 How to fill the rinse aid dispenser CAUTION! Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.
-
Page 15: Daily Use
ENGLISH 9. DAILY USE 1. Open the water tap. For information about the 2. Press the on/off button to activate the detergent dosage, refer to appliance. the manufacturer's Make sure that the appliance is in instructions on the programme selection mode. packaging of the product. -
Page 16: Hints And Tips
• The remaining time counts down Cancelling the programme in hours. The final hour is displayed in minutes. Press and hold simultaneously When the countdown is complete, the programme starts and the indicator of the until the appliance is in programme selection mode. - Page 17 ENGLISH • You can use dishwasher detergent, • Make sure that the water softener rinse aid and salt separately or you level is correct. If the level is too high, can use the multi-tablets (e.g. ''All in the increased quantity of salt in the 1'').
-
Page 18: Care And Cleaning
10.5 Before starting a • The correct quantity of detergent is used. programme 10.6 Unloading the baskets Before you start the selected programme, make sure that: 1. Let the tableware cool down before • The filters are clean and correctly you remove it from the appliance. - Page 19 ENGLISH 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
- Page 20 11.5 Cleaning the lower spray 11.6 Cleaning the upper spray We recommend to clean the lower spray We recommend to clean the upper spray arm regularly to prevent soil from arm regularly to prevent soil from clogging the holes.
- Page 21 ENGLISH 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards. 4.
-
Page 22: Troubleshooting
12. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code. - Page 23 ENGLISH Problem and alarm code Possible cause and solution Malfunction of the wash • Switch the appliance off and on. pump or the drain pump. The display shows i51 - i59 or i5A - i5F. The temperature of the wa‐ •...
- Page 24 Problem and alarm code Possible cause and solution Rattling or knocking • The tableware is not properly arranged in the bas‐ sounds from the inside of kets. Refer to basket loading leaflet. the appliance. • Make sure that the spray arms can rotate freely.
- Page 25 ENGLISH Problem Possible cause and solution There are stains and dry wa‐ • The released quantity of rinse aid is not sufficient. ter drops on glasses and Adjust the rinse aid dosage to a higher level. dishes. • The quality of the rinse aid can be the cause. The interior of the appliance •...
-
Page 26: Technical Information
Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 575 Voltage (V) 220 - 240 Electrical connection... - Page 28 www.electrolux.com/shop...