Denkovi smartDEN IP-Maxi Series User Manual page 84

Get /Ri
Get /DIi
Get /ATIi
Get /ATISi
Get /AOi
Get /All
Set /SDate
Set /STime
Set /RSi
Set /RAll
Set /RNi
Set /RFi
Set /AOSi
*Please note these messages (notifications) are published by the smartDEN IP-
Maxi-MQ module only if the "MQTT" option is checked (enabled) in the respective
®
On, Off
On, Off
0...1023
String
0...1023
I/O states in XML or
JSON format
Settings
Date in format
dd/mm/yyyy
Time in format hh:mm
Relays
(i=1...8)
0,1,2
0 to 255
1 to 65535
1 to 65535
Analog Outputs
(i=1...2)
0...1023
smartDEN IP-Maxi-XX User Manual
topics (excluding the /All topic)
1 - all the I/O states are published
at once in XML format under the
/All topic.
2 - all the I/O states are published
at once in JSON format under the
/All topic.
See: Appendix 1. Application reply
formats
Notification relay topic, containing
the relay (i=1...8) state*
Notification DI topic, containing
the digital input (i=1...8) state*
Notification AI/TI
containing the analog/temperature
input (i=1...4 - analog, i=5...8 -
temperature) raw value*
Notification AI/TI scaled topic,
containing the analog/temperature
input (i=1...4 - analog, i=5...8 -
temperature) scaled value*
Notification AO topic, containing
the analog output (i=1...2) state
(units)*
All the I/O states in XML or JSON
format
The current system date
The current system time
Turns relays OFF or ON (0 - OFF,
1 - ON, 2 – TOGGLE)
Turns all the relays at once. The
most significant bit of the value
specifies the state of relay 8, and
the least significant bit – the state
of relay 1
Generates a positive (ON) pulse
on a single relay. The pulse
duration is in ms x 100
Generates a negative (OFF) pulse
on a single relay. The pulse
duration is in ms x 100
Set the analog output value
30 Oct 2023
raw topic,
- 84 -