Receiving A Phone Call - Motorola V3690 Manual

        

Receiving a Phone Call

To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM 900/1800 service.
• Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
When your phone receives a call, it will ring or vibrate and the
display will show the Call message (if you have Caller Line
Identification, the caller's number or name will be displayed
instead).
Normally, the call is answered as soon as the phone is opened.
However, if the Key Answer Only option is selected, opening the
phone will not answer the call - you will have to press a key.
When the identification is displayed, you can decide whether or
not to answer the call by pressing , a numeric key (
), or . To set this option, see 'Key Answer Only'.
You can also answer using the keys if the phone rings whilst the
phone is already open.
If your phone is open and you do not want to answer the call,
you can:
Press and release the key. If you have enabled the
'Detailed Diverting - If Busy' or 'Divert when unavailable'
options in the Options Menu, the caller will be diverted to the
forwarding number, otherwise the caller will hear the busy
tone.
or
Press and hold the key. This will reject the incoming call.
No call divert option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed to show you that a call
attempt was received.
Ending a Phone Call
To end a phone call, press , or close phone.
to
Making and Receiving Phone Calls
27 English