Motorola V3 - MANUAL 2 Manual page 42

None
7UKPI %CRKVCNK\CVKQP
Press 0 in a text entry screen to change text case.
Indicators at the top of the display show the capitalization
setting:
U
= no capital letters
T
= all capital letters
The following indicators identify Numeric or Symbol entry
mode:
W
= numeric mode
7UKPI K6#2s /QFG
iTAP mode lets you enter words using one keypress per
letter. The iTAP software combines your keypresses into
common words, and predicts each word as you enter it.
For example, to type "the," you would press
8 4 3. The iTAP software recognizes that the
most common word formed by this keypress combination
is "the," and predicts that "the" is the word you are spelling.
Other common words or word fragments that can be
spelled by the same keypress combination are presented
as alternate choices at the bottom of the display.
If necessary, press # in a text entry screen to switch to
iTAP mode. If iTAP mode is not set as the Primary or Secondary
entry mode, see page 41.
Hide the Secondary setting if you prefer
not to set a secondary text entry mode
(only available for Secondary Setup).
V
= capitalize next
letter only
[
= symbol mode