Motorola V3 - MANUAL 2 Manual page 30

This procedure turns Bluetooth on and leaves it on until
you turn it off. When your phone's Bluetooth power is on,
your handsfree accessory can automatically reconnect
to the phone when you turn on the accessory or move
it within range of the phone.
To extend battery life, use the above procedure
and set Bluetooth power to Off when not in use.
5GCTEJKPI HQT 1VJGT &GXKEGU
To connect your phone to a Bluetooth headset or
handsfree device:
Find the Feature
If Bluetooth is turned off, your phone asks if you want to
Temporarily power on? Bluetooth. Press YES (-) to proceed.
Alternatively, set Power to On in the Setup menu to turn
Bluetooth on and leave it on.
Your phone scans for and displays a list of device(s)
located within range of the phone.
If your phone is already connected to a device, you
must disconnect from it to search for other devices.
To connect to a device, highlight the device name and
press SELECT (+).
The device may request permission to bond with your
phone. Select YES (-) and enter the correct PIN code to
create a secure connection with the device. When the
M > Settings > Connection
> Bluetooth Link
> Hands-free
> [Look for devices]