Kirby Morgan SuperFlow User Manual

Second stage & non-balanced scuba regulator assemblies
Hide thumbs Also See for SuperFlow:

Advertisement

Quick Links

User Guide For
SuperFlow
Second Stage &
®
Non-Balanced Scuba
Regulator Assemblies
Document P/N 100-120
SuperLite, SuperFlow, SuperMask, REX, DSI, Diving Systems International, 27, EXO,
BandMask, KMB-Band Mask, KMB, Miller Diving, Kirby Morgan Diamond, Kirby
Morgan Dive Systems, Kirby Morgan, and the color YELLOW, when used on diving
helmets, are all registered trademarks of Kirby Morgan Dive Systems, Inc. Use of
these terms to describe products that KMDSI does not manufacture is illegal.
The two dimensional images (such as photographs and illustrations) of our products
are © copyrighted and trademarks of Kirby Morgan Dive Systems, Inc. The three
dimensional forms of our products are trademark, trade design and trade dress
protected.
© Kirby Morgan Dive Systems, Inc. All rights reserved. This user guide is made avail-
able for the express use of owner of this Kirby Morgan product. No part of this user
guide may be reproduced, stored in any retrieval system, or transmitted, or used in
any form or by any means, whether graphic, electronic, mechanical, photocopy, or
otherwise by technology known or unknown, without the prior written permission
of Kirby Morgan Dive Systems, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SuperFlow and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kirby Morgan SuperFlow

  • Page 1 © Kirby Morgan Dive Systems, Inc. All rights reserved. This user guide is made avail- able for the express use of owner of this Kirby Morgan product. No part of this user guide may be reproduced, stored in any retrieval system, or transmitted, or used in...
  • Page 2: Warranty

    WARRANTY https://www.kirbymorgan.com/support/warranty...
  • Page 3 This page intentionally left blank...
  • Page 4: Table Of Contents

    During the Dive After the Dive Removal of the Regulator Assembly from the Cylinder Valve Safety Precautions Specifications Routine Maintenance Daily Pre-Dive Inspection Checklist Post Dive Maintenance © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 5 Scheduled Maintenance Maintenance Record © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 6: Definitions Of Signal Words Used In This Guide

    It is important for the user of this equipment to understand that we at Kirby Morgan consider ourselves to be only a part of the process of © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 7: Product Changes

    In order to use this regulator assembly, it is essential to complete a train- ing course and receive certification, issued by a recognized national scuba training organization, confirming your ability to dive. © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 8 EN250 standard concerning the connection of compo- nents. Only original Kirby Morgan hoses should be used as replacements. - HP thread 7/16" - 20 UNF - LP thread 3/8" - 24 UNF © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 9: Cold Water Diving

    -54 °C / 65.2 °F. Excess water vapor can freeze, causing a free flow, or blocking the air flow completely. © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 10: 1St Stage Scuba Regulator And 2Nd Stage Regulator Maximum Work Pressure

    The weight of the bag is usually .75 pounds (.35 Kg); The package dimension is 8 × 10 inches (203.2 × 254 mm); One regulator is packed per bag; © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 11 The regulators are sent to dealers by plane and truck. Depending on how the dealer wants it sent. Packaging Step 1 Packaging Step 2 Packaging Step 3 Packaging Step 4 © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 12: Regulator Serial Number Location

    Cold Water Diving - water temperature below +10 °C (50 °F) Warm Water Diving - water temperature over +10 °C (50 °F) Maximum Depth: 50 m / 164 feet. Storage Temperatures: +70 °C / +158 °F (max) -30 °C / -22°F (min) © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 13: Kirby Morgan Superflow Second Stage Scuba Regulators

    Before you dive with your new Kirby Morgan regulator, it is important to read this guide in its entirety; to become familiar with its features, as well as the correct procedures for setup, pre-dive inspection, and post-dive maintenance.
  • Page 14: Preparation And Setup

    NEVER dive with a regulator that shows signs of damage, or provides substandard performance until it has re- ceived a complete inspection and service from an Authorized KMDSI repair technician. © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 15: Inspection Checklist

    If leakage persists, do not dive with the regulator! Return the regulator to a KMDSI Dealer. 10. Slowly back out on the second stage regulator adjustment knob (coun- © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 16: During The Dive

    If fresh water is available, rinse your second stage regulator completely while it is still connected to the tank before depressurizing it. This helps to prevent any contaminants from entering sealing surfaces inside the regula- © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 17: Removal Of The Regulator Assembly From The Cylinder Valve

    305-166 Plastic SuperFlow Scuba Regulator: ® Type: Bias Adjustable, Downstream Demand, Non-Balanced. Adjustable range: 70-180 psi, Optimum: 140 psi. Inlet fitting threads: 9/16-18 UNF-2A Body Material: Modified PPO plastic. © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 18: Routine Maintenance

    Visually inspect all regulator components including submersible pres- sure gage, inflator hose and other components. Visually inspect the first stage filter in the yoke for signs of dirt and corrosion. © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 19: Post Dive Maintenance

    Screw the second stage regulator adjustment knob all the way out, away from the second stage body. This will lengthen the life of the regulator seat considerably. © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 20: Scheduled Maintenance

    The first stage sintered filter, located in the yoke assembly, should be visually inspected on a regular basis. If a visual inspection reveals dis- coloration or obvious signs of dirt or corrosion, the regulator should © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 21 Scheduled Maintenance be thoroughly serviced. In addition, the scuba cylinders used must be internally inspected and cleaned if necessary. © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 22: Maintenance Record

    Maintenance Record Maintenance Record DAT E D E A L E R N A M E T E C H N I C I A N © MMXXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 241001002...
  • Page 23 This page intentionally left blank...
  • Page 24 1430 Jason Way, Santa Maria, CA 93455 Phone: 805/928-7772 Fax: 805/928-0342 www.kirbymorgan.com E-mail: kmdsi@kirbymorgan.com...

Table of Contents