Care And Cleaning - GE Profile OPAL P4INAASSTSS Owner's Manual

Care and Cleaning

To keep nugget ice tasting fresh and the ice maker performing
Sanitizing is recommended once per week to keep the unit
hygienic and disinfected.
Descaling is recommended for removing hard mineral
deposits and should be performed every 2-3 weeks
depending on water hardness.
WARNING
cleaning with bleach, use bleach in a well ventilated area
System Descaling / Sanitizing Procedure
First Time Use:
Cleaning Notification: After 100 hours of ice making, the
Cleaning indicator will flash to alert the user that a descale
completed but will not prevent the machine from making ice
in the meantime. This alert is hard water dependent. Please
reference the hard water map on Page 6 for guidance.
and then unplug the Opal.
not present, first remove the screen intake filter and
rinse it with water to clean out any debris that may have
screen intake filter so it is in place during the descaling or
the side tank is present, remove the side tank from the
side tank base and disconnect the side tank base before
draining.
5. Once water stops flowing, re-insert the drain plugs.
49-9000041 Rev. 2
the product, then use a soft cloth dampened with soapy water
not use soap to clean the reservoir.
WARNING
hand, and when not in use.
NOTE:
Unplug the product before cleaning by
9