Care And Cleaning - GE Profile XPIOX3SCSS Owner's Manual

Care and Cleaning

To keep nugget ice tasting fresh and ice maker performing
Descaling is recommended for removing hard mineral
depending on water hardness.
Sanitizing
water, cleaning schedule may need to be adjusted based
on hardness of water.
switching to distilled water is suggested. To clean the
soft cloth dampened with soapy water to gently clean the
System Descaling / Sanitizing Procedure
4. Descaling:
or use the Opal Cleaning Kit and follow instructions
provided.
Sanitizing:
and then adding one teaspoon of bleach.
indicator light will turn off.
NOTE:
Descaling: run the clean cycle up to 3 times and then
soaking, dip a cloth in the solution and wipe the inner
you are done, rinse the cloth with clean water and wipe
process for very heavy scale deposits.
Sanitizing: once the Cleaning indicator turns off,
promptly drain the Opal.
49-9000029 Rev. 4
WARNING
cleaning with bleach, use bleach in a well ventilated area
WARNING
hand, and when not in use.
Clean
Hold 3 Sec
Making Ice
Defrosting
Water
Light Power
Add Water
Cleaning
7